
PrimePACK On-Module Gate Drive
On-module driver for PrimePACK modules, in single, two-in-parallel and three-in-parallel configurations.
Working with lead customers.
Details →Gate Drivers
Our gate drives use the same power and fibre-optic interfaces as other commercial products, with embedded PLD and software technology that lets the power stack designer configure and monitor the driver in situ while the converter runs normally.
Why this platform
Change gate resistors, CGE, clamping and timings without opening the stack.
One driver covers modules from several manufacturers, so sourcing stays flexible.
Event counters and diagnostics download straight from the driver for fault analysis.
Designed and tested to international standards including EN 50155 and IEC 61800-5-1.
Production range
Every driver below is in production or sampling today.
| Image | Product | Mounting | Description | Module class | Status |
|---|---|---|---|---|---|
![]() | AP12G | On-module | Single on-module gate drive for 1200 V high-power modules, configured in situ over the fibre-optic link. | 1.2 kV | Production |
![]() | AP17G | On-module | Single on-module gate drive for 1700 V high-power modules, configured in situ over the fibre-optic link. | 1.7 kV | Production |
![]() | AP33A | On-module | Plug-and-play 3300 V gate drive for 140×190 mm IGBT modules from all major manufacturers. | 3.3 kV | Production |
![]() | AD00XA8 | Off-module | Single off-module gate drive and direct InPower replacement, with a simple module interface card. | 1.2 kV · 1.7 kV · 3.3 kV | Production |
![]() | AP03L | Off-module | Dual-channel off-module driver supporting up to 3300 V, with module interface cards for XHP3, nHPD², LinPak and LV100. | 1.7 kV · 3.3 kV | Production |
![]() | AP05J | Off-module | Single-channel baseboard for 4500 V and 6500 V modules, used with an external isolated DC-DC converter. | 4.5 kV · 6.5 kV | Production |
![]() | AE00N | On-module | Cost-optimised dual-channel E-Series driver for 1700 V to 3300 V modules, factory configured. | 1.7 kV · 3.3 kV | Production |
![]() | AE00M | On-module | Cost-optimised dual-channel E-Series driver for 1700 V to 3300 V modules, factory configured. | 1.7 kV · 3.3 kV | Production |
![]() | AE45K | On-module | Dual-channel 4500 V driver with active clamping and a wide input voltage range. | 4.5 kV | Sampling |
![]() | ASD6/ASD7 | DC-DC | 12 kV DC working, fault-tolerant isolated supply for 4500 V and 6500 V gate drives. | 4.5 kV · 6.5 kV | Production |
![]() | CE00LB | Core | Gate drive core with active clamping and an electrical interface, for integration into your own design. | — | Production |
![]() | XS000026/27 | Component | Compact, low-profile 15 V or 24 V gate drive transformer for your own in-house driver design, with 6 kVrms baseplate isolation. | 3.3 kV | Production |
![]() | 6500 on-module | On-module | Single-module and two-in-parallel on-module driver for 6500 V HPM, with an off-module DC-DC converter. | 6.5 kV | Sampling |
Off-module drivers require a module interface card (MIC) fitted to the power module and connected to the driver by ribbon cable.Ask us which MIC you need →
Development roadmap
Subject to change. We keep the status current — if you are interested in something here, tell us and we will give you the real timeline.

On-module driver for PrimePACK modules, in single, two-in-parallel and three-in-parallel configurations.
Working with lead customers.
Details →
Single-channel baseboard with a 4500 V module interface card, supporting up to three modules in parallel.
Engaging customers for initial feedback.
Details →Module interface cards
Off-module drivers connect to the power module through a MIC, fitted to the module and joined to the driver by ribbon cable. The MIC does the adapting, which is why one driver covers so many packages.

nHPD², two modules in parallel at 4 mm spacing.
For AP03L

High-voltage module interface card for 4500 V and 6500 V HPM packages.
For AP05J

nHPD² module interface card.
For AP03L

LV100 module interface card.
For AP03L

Supports up to three modules in parallel.
For AP03L
Datasheets
Datasheets and technical manuals are available on request while we move them onto the new site.