AP Series · Off-module
AP05J
Single-channel baseboard for 4500 V and 6500 V modules, used with an external isolated DC-DC converter.
Also needs a module interface card and an ASD6 / ASD7 DC-DC converter.
Driver details →Dynex
4500 V, 1200 A power module in the IHV package. Supported by 2 qualified Poweronics drivers.
Driver options
The DIM1200ASM45-TS is a 4500 V, 1200 A module from Dynex in a IHV package. Two Poweronics drivers are qualified against it — AP05J and ASD6/ASD7, covering both off-module and dc-dc mounting, so the choice is mechanical rather than electrical.
ASD6/ASD7 drives it with no additional interface hardware. AP05J needs a module interface card fitted to the module. AP05J needs an external ASD6 or ASD7 isolated DC-DC converter. Gate resistors, gate–emitter capacitance, active clamping and timings are set in situ with the Power Insight Configurator, so one part number covers a range of stack designs.
Qualified against this module means we have the data to back it. If you are driving the DIM1200ASM45-TS in an unusual topology or at the edge of its ratings, tell us the application and we will confirm the fit.
AP Series · Off-module
Single-channel baseboard for 4500 V and 6500 V modules, used with an external isolated DC-DC converter.
Also needs a module interface card and an ASD6 / ASD7 DC-DC converter.
Driver details →DC-DC · DC-DC
12 kV DC working, fault-tolerant isolated supply for 4500 V and 6500 V gate drives.
Driver details →Same class
Get in touch
Tell us the topology and the application and we will confirm the driver, the module interface card and any DC-DC converter you need.