Talk to an engineer

MinebeaMitsumi / Hitachi

MBN500H65E2

6500 V, 500 A power module. Supported by 2 qualified Poweronics drivers.

Driver options

What drives the MBN500H65E2

The MBN500H65E2 is a 6500 V, 500 A module from MinebeaMitsumi / Hitachi. Two Poweronics drivers are qualified against it — AP05J and ASD6/ASD7, covering both off-module and dc-dc mounting, so the choice is mechanical rather than electrical.

ASD6/ASD7 drives it with no additional interface hardware. AP05J needs a module interface card fitted to the module. AP05J needs an external ASD6 or ASD7 isolated DC-DC converter. Gate resistors, gate–emitter capacitance, active clamping and timings are set in situ with the Power Insight Configurator, so one part number covers a range of stack designs.

Qualified against this module means we have the data to back it. If you are driving the MBN500H65E2 in an unusual topology or at the edge of its ratings, tell us the application and we will confirm the fit.

AP Series · Off-module

AP05J

Single-channel baseboard for 4500 V and 6500 V modules, used with an external isolated DC-DC converter.

Also needs a module interface card and an ASD6 / ASD7 DC-DC converter.

Driver details →

DC-DC · DC-DC

ASD6/ASD7

12 kV DC working, fault-tolerant isolated supply for 4500 V and 6500 V gate drives.

Driver details →

All drivers listed for this module: AP65AP05JASD6/ASD7

Same class

Other 6500 V MinebeaMitsumi / Hitachi modules

Full matrix

Get in touch

Designing with the MBN500H65E2?

Tell us the topology and the application and we will confirm the driver, the module interface card and any DC-DC converter you need.